Grizly 2.0 CHAINSAW BOOTS TO EN ISO 20345 AND EN ISO 17249 CLASS 2

As low as €306.27 €249.00
In stock
SKU
BasePro-3SIC
The Grizzly 2.0 boots are based upon our experience in manufacturing chainsaw protective clothing and the knowhow of the Italians in boot manufacturing. Developed for groundwork, they are mainly composed of orange Hypertex and rubber reinforcement to reduce maintenance to a strict minimum and take robustness to the highest achievable level. As far as the sole is concerned, we couldn’t have chosen a better brand than Vibram®. The long lasting Vibram® Teton sole assures you grip on unstable and heavy grounds, wet or dry. A wide panel of testers were unanimous on every level: ‘’these boots are top of the notch’’! What else can we say?
The Grizzly 2.0 boots are based upon our experience in manufacturing chainsaw protective clothing and the knowhow of the Italians in boot manufacturing. Developed for groundwork, they are mainly composed of orange Hypertex and rubber reinforcement to reduce maintenance to a strict minimum and take robustness to the highest achievable level. As far as the sole is concerned, we couldn’t have chosen a better brand than Vibram®. The long lasting Vibram® Teton sole assures you grip on unstable and heavy grounds, wet or dry. A wide panel of testers were unanimous on every level: ‘’these boots are top of the notch’’! What else can we say?



EXTERIOR

  • Basic requirements+steel toecap with impact resistance of 200J and compression of 1500 daN (SB)
  • Cold insulation sole (CI)
  • Heat Insulation (HI)
  • Anti-perforation sole (P)
  • Waterproof (WR)

INTERIOR

  • Steel toe cap
  • Tepor breathable and waterproof membrane with 10.000mm water column waterproofness to ISO 811
  • Memory foam insole
  • Kevlar® anti-perforation sole

FABRIC

  • 55% Polyamid - 40% Polyurethane - 5% Polyester Hypertex fabric with Putek technology ± 390g/M2
  • Waterproof reinforcement 2.0mm

EUROPEAN STANDARDS

  • EN ISO 17249 : 2013 + AC : 2014 level 2
  • EN ISO 20345 : 2011 SB E P HI CI WR AN WRU

SIZES

38 - 48



WASH & CARE INSTRUCTIONS

No information available

 

More Information
Brand BasePro
Write Your Own Review
You're reviewing:Grizly 2.0 CHAINSAW BOOTS TO EN ISO 20345 AND EN ISO 17249 CLASS 2
Your Rating

This garment can be printed on with graphics and logos. Please contact us to discuss printing onto your garments.

LT01: 70% wool, 15% polyester, 10% polyamide, 5% acrylic 900 Grms/mt

Upsell Products
Grizly 2.0 CHAINSAW BOOTS TO EN ISO 20345 AND EN ISO 17249 CLASS 2
Back to Top